Caporali (Chevrons)

Special markings for automatic toll

Coloured markings for reserved lanes made of elastoplastic tape Snoline Tikappa, pressure-sensitive, high retroreflectivity.

CHARACTERISTICS

Tape is in compliance with European standard EN 1436.

Thickness: 1.5 mm (typical average value).

Luminance factor ß: not less than 0,60 white.

Luminance factor ß: not less than 0,40 yellow.

Retroreflectivity: 300 mcd/lux*m2 (measured with geometry 1.24°/2.29°)

Skid resistance: not less than 50 SRT units in wet conditions (measured with TRL pendulum), white and yellow.

GENERAL APPLICATION CONDITIONS

New or normally worn paving, without cracks. Must be clean and free of moisture and grease.

Temperature of pose: Min 10°; Max 35°C.

Relative moisture: 70% max.

The effective life of the product may vary, depending mainly on the intensity of the traffic and weather conditions, but normally should not be less than 36 months.

FAQ about application

A special primer needs to be applied before the self-adhesive version can be laid.

Road Markings, Alphabetical list