RALSAFE consists of:
- A black intermediate element made from indented anti-skid rubber, interspersed with yellow inserts of the same width made from retroreflecting elastoplastic tape for improved visibility and safety in normal conditions and to guarantee visibility in conditions of poor visibility, rain, fog, etc.
- A black terminal element made from indented non-skid rubber, with a bevelled edge, to allow the edge to slope down to the ground without sudden variations in height.
The elements also have lateral bevelling to allow water to run off and a junction tooth to guarantee alignment and greater resistance to traffic.
Each element is fixed to the ground by anchor bolts fixed by mechanical or chemical means.
CHARACTERISTICS
RALSAFE 3
- Speed: less than 50 km/h
- Intermediate elements: 600 x 330 x h 30 mm or 600 x 500 x h 30 mm
- Terminal elements: 600 x 180 x h 30 mm
RALSAFE 5
- Speed: less than 40 km/h
- Intermediate elements: 900 x 330 x h 50 mm or 900 x 500 x h 50 mm
- Terminal elements: 900 x 260 x h 50 mm
|
|
